Friday, April 20, 2018

APPLIED HYDRO AEROMECHANICS IN OIL AND GAS DRILLING EUGENIY G. LEONOV and VALERIY I. ISAEV

APPLIED HYDRO AEROMECHANICS IN OIL AND GAS DRILLING EUGENIY G. LEONOV and VALERIY I. ISAEV
CONTENTS
1-MAIN RESULTS AND DEVELOPMENT LINES IN HYDRO-AEROMECHANICS OF DRILLING PROCESSES
2-BASIC PROBLEMS OF HYDRO-AEROMECHANICS IN DRILLING PROCESSES
3-MULTIPHASE MEDIA IN DRILLING PROCESSES
4-HYDRO-AEROMECHANIC EQUATIONS OF DRILLING PROCESSES
5-HYDROSTATICS OF SINGLE-PHASE FLUIDS AND TWO-PHASE MIXTURES IN GRAVITY FIELD
6-STATIONARY FLOW OF FLUIDS IN ELEMENTS OF THE WELL CIRCULATION SYSTEM
7-EQUILIBRIUM AND MOTION OF RIGID PARTICLES IN FLUID, GAS, AND GAS–LIQUID MIXTURE 
8-STATIONARY FLOW OF GAS AND GAS-CUTTING MIXTURE IN ELEMENTS OF WELL CIRCULATION SYSTEM
9-STATIONARY FLOWS OF GAS–LIQUID MIXTURES IN A WELL
10-NONSTATIONARY FLOWS OF SINGLE-PHASE FLUIDS IN A WELL
11-FLOWS OF FORMATION FLUIDS AND ROCK SOLIDS
12-NONSTATIONARY FLOWS OF GAS–LIQUID MIXTURES IN WELL-FORMATION SYSTEM
13-NONSTATIONARY FLOWS OF FLUID MIXTURES IN WELL-FORMATION SYSTEM: CALCULATION OF FLUID-GAS BLOWOUT KILLING 
14-DISTRIBUTION OF CONCENTRATION AND PRESSURE IN DISPLACEMENT OF NEWTONIAN AND VISCOUS-PLASTIC FLUIDS FROM CIRCULAR PIPES AND ANNULAR CHANNELS: HYDRAULIC CALCULATION OF CEMENTATION REGIME
15-SEDIMENTATION OF RIGID PHASE IN DRILLING FLUID AFTER DEADLOCK OF MIXING
16-EXPERIMENTAL DETERMINATION OF RHEOLOGICAL CHARACTERISTICS
PREFACE
At the basis of majority technological operations of oil and gas well drillinglie hydro-aeromechanical  processes. Currently, drilling is practically impossible without circulation of drilling and plugging fluids. Actually, removal of cutting from the well, application of turbo drills and jet bits, lowering of casing strings and casing cementing, control of circulation loss and reservoir fluid showings, investigation of lost circulations, and production horizon zones do not make a complete list of operations that go hand i hand with hydro-aeromechanical processes. Hydro-aeromechanics in drilling is a special branch in oil technology in which flows of circulating and plugging fluids, skeleton, and bed fluid in well drilling are considered and described. Designing, planning, optimization, and realization of drilling schemes would have been impossible without data made available by this branch. A rapid rise in the number and depth of wells in the last few years has attracted enhanced attention to hydro-aeromechanical problems in drilling. With scientists joining forces, some problems were successfully solved. On the basis of these developments, the hydro-aeromechanical theory underlying the main technological operations of well drilling has been systematically presented in this book. The text is based on lectures given at the Moscow State Gubkin University of Oil and Gas.
Download The Book For Free In PDF Format

Download 


***********************


***********************

No comments:

Post a Comment

DMCA

Disclaimer for MEP Engineering Café (“MEP Engineering Café”) respects the intellectual property rights of others and expects its users to do the same. In accordance with the Digital Millennium Copyright Act of 1998, the text of which may be found on the U.S. Copyright Office website at http://www.copyright.gov/legislation/dmca.pdf, MEP Engineering Café will respond expeditiously to claims of copyright infringement committed using the MEP Engineering Café service and/or the MEP Engineering Café website.




DMCA.com Protection Status

Social Media

Find your book

Featured Post

 Download Short Circuits in Power Systems A Practical Guide Second Edition By Ismail Kasikci Contents of  Short Circuits in Powe...