Saturday, April 28, 2018

DESIGN AND RATING SHELL AND TUBE HEAT EXCHANGERS By John E. Edwards

DESIGN AND RATING SHELL AND TUBE HEAT EXCHANGERS By John E. Edwards

Contents:
1.0 Introduction
2.0 Fundamentals
2.1 Basic Theory
2.2 Heat Transfer Model Selection
3.0 Design Guidelines
Appendices:
I Thermal Design Models Synopsis
II CC-THERM User Guidelines
III Thermal Model Selection
IV Shortcut Heat Exchanger Design
V TEMA Heat Exchanger Layout Designation
VI Typical Overall Heat Transfer Coefficients
VII Typical Resistance Fouling Coefficients
VIII LMTD Correction Factor Ft
IX Wolverine Tube General Details
X Midland Wire Cordage Turbulator Details
XI Tube Dimensional Data
XII Shell Tube Count Data
References:
1. Hewitt,G.F. et al (1994) Process Heat Transfer, (CRC Press)
2. Perry,R.H. and Green, D. (1984) Perry’s Chemical Engineers Handbook, 6th edition (McGraw Hill)
3. Kern,D.Q. (1950) Process Heat Transfer (McGraw Hill)
4. Coulson,J.M. and Richardson,J.F. (1993) Chemical Engineering Vol 1, 4th edition (Pergamon)
5. Skinnet,R.K. (1993) Coulson & Richardson’s Chemical Engineering Vol 6, 2nd edition (Pergamon)
6. Chemstations,Inc. CHEMCAD THERM Version 5.1 User Guide
7. Schlunder,E.U. (1993) VDI Heat Atlas (Woodhead Publishing)
8. Seider,D.S., Seader,J.D.Seader and Lewin,R.L. Process Design Principles, (John Wiley & Sons, Inc.)
[ C20] References of this type are to be found in CC-THERM > Help > Appendix
 Introduction:
Shell and tube heat exchangers are used extensively throughout the process industry and as such a basic understanding of their design, construction and performance is important to the practising engineer. The objective of this paper is to provide a concise review of the key issues involved in their thermal design without having to refer to the extensive literature available on this topic. The author claims no originality but hopes that the format and contents will provide a comprehensive introduction to the subject and enable the reader to achieve rapid and meaningful results. The optimum thermal design of a shell and tube heat exchanger involves the consideration of many interacting design parameters which can be summarised as follows:
Download The Book For Free In PDF Format
Download 




***********************

No comments:

Post a Comment

DMCA

Disclaimer for MEP Engineering Café (“MEP Engineering Café”) respects the intellectual property rights of others and expects its users to do the same. In accordance with the Digital Millennium Copyright Act of 1998, the text of which may be found on the U.S. Copyright Office website at http://www.copyright.gov/legislation/dmca.pdf, MEP Engineering Café will respond expeditiously to claims of copyright infringement committed using the MEP Engineering Café service and/or the MEP Engineering Café website.




DMCA.com Protection Status

Social Media

Find your book

Featured Post

 Three-Dimensional Integrated Circuit Design EDA, Design and Microarchitectures by Yuan Xie, Jason Cong and Sachin Sapatnekar Content  1 Int...