Monday, April 30, 2018

HVAC Water Chillers and Cooling Towers Fundamentals, Application, and Operation by Herbert W. Stanford

HVAC Water Chillers and Cooling Towers Fundamentals, Application, and Operation by 
Herbert W. Stanford
Contents:
Part 1 Fundamentals
1. Refrigeration Machines
2. Chiller Configurations
Part II Design and Application
3. Chilled Water System Elements
4. Chiller Controls
5. Thermal Storage
6. Special Chiller Considerations
Part III Operation and Maintenance
7. Chiller Operation and Maintenance
8. Buying a Chiller
Part IV Fundamentals
9. Cooling Tower Fundamentals
10. Cooling Tower Components
Part V Design and Application
11. Tower Configuration and Application
12. Cooling Tower Controls
13. Condenser Water Treatment
14. Special Tower Considerations
Part VI Operation and Maintenance
15. Cooling Tower Operation and Maintenance
16. Buying a Cooling Tower
17. In-Situ Tower Performance Testing
Preface:
There are two fundamental types of HVAC systems designed to satisfy building cooling requirements: direct expansion (DX) systems, in which there is direct heat exchange between the building air and the refrigerant, and secondary refrigerant systems that utilize chilled water as an intermediate heat exchange medium to transfer heat from the building air to the refrigerant. Chilled water systems are the heart of central HVAC cooling, providing cooling throughout a building or group of buildings from one source. Centralized cooling offers numerous operating, reliability, and efficiency advantages over individual DX systems and, on a life-cycle basis, can have significantly lower total cost. Every central HVAC cooling system is made up of one or more  refrigeration machines, or water chillers, designed to collect excess heat from buildings and reject that heat to the outdoor air. The water chiller may use the vapor compression refrigeration cycle or the absorption refrigeration cycle. Vapor compression refrigeration compressors may be of the reciprocating, helical screw, or centrifugal type with electric or gas-fired engine prime movers. The heat collected by the water chiller must be rejected to the atmosphere. This waste heat can be rejected by air-cooling, in a process that transfers heat directly from the refrigerant to the ambient air, or by water-cooling, a process that uses water to collect the heat from the refrigerant and then to reject that heat to the atmosphere. Water-cooled systems offer advantages over air-cooled systems, including smaller physical size, longer life, and higher operating efficiency. The success of their operation depends, however, on the proper sizing, selection, application, operation, and maintenance of the cooling tower.
Download The Book For Free In PDF Format

Download 

2 comments:

  1. You're likely consuming more electricity while getting less effective cooling. Additionally, whatever is causing the decrease in performance is likely to continue deteriorating over time. You can grant your AC a stay of execution by bringing in a repair technician to assess the situation. Toronto Air Conditioning Repair

    ReplyDelete

DMCA

Disclaimer for MEP Engineering Café (“MEP Engineering Café”) respects the intellectual property rights of others and expects its users to do the same. In accordance with the Digital Millennium Copyright Act of 1998, the text of which may be found on the U.S. Copyright Office website at http://www.copyright.gov/legislation/dmca.pdf, MEP Engineering Café will respond expeditiously to claims of copyright infringement committed using the MEP Engineering Café service and/or the MEP Engineering Café website.




DMCA.com Protection Status

Social Media

Find your book

Featured Post

 Download Short Circuits in Power Systems A Practical Guide Second Edition By Ismail Kasikci Contents of  Short Circuits in Powe...