Thursday, June 11, 2020

materials for Civil and Construction engineers FOURTH Edition Edited By Michael S. MaMlouk and John P. ZaniewSki

materials for Civil and Construction engineers FOURTH Edition Edited By Michael S. MaMlouk and John P. ZaniewSki

Contents :

1- Materials engineering Concepts
2- nature of Materials
3- Steel
4- Aluminum
5- Aggregates
6- Portland Cement, Mixing water, and Admixtures
7- Portland Cement Concrete
8- Masonry
9- Asphalt Binders and Asphalt Mixtures
10- wood
11- Composites

Preface of materials for Civil and Construction engineers

A basic function of civil and construction engineering is to provide and maintain the infrastructure needs of society. The infrastructure includes buildings, water treatment and distribution systems, waste water removal and processing, dams, and highway and airport bridges and pavements. Although some civil and construction engineers are involved in the planning process, most are concerned with the design, construction, and maintenance of facilities. The common denominator among these responsibilities is the need to understand the behavior and performance of materials. Although not all civil and construction engineers need to be material specialists, a basic understanding of the material selection process, and the behavior of materials, is a fundamental requirement for all civil and construction engineers performing design, construction, and maintenance.

Material requirements in civil engineering and construction facilities are different from material requirements in other engineering disciplines. Frequently, civil engineering structures require tons of materials with relatively low replications of specific designs. Generally, the materials used in civil engineering have relatively low unit costs. In many cases, civil engineering structures are formed or fabricated in the field under adverse conditions. Finally, many civil engineering structures are directly exposed to detrimental effects of the environment.

The subject of engineering materials has advanced greatly in the past few decades. As a result, many of the conventional materials have either been replaced by more efficient materials or modified to improve their performance. Civil and construction engineers have to be aware of these advances and be able to select the most costeffective material or use the appropriate modifier for the specific application at hand.

This text is organized into three parts: (1) introduction to materials engineering, (2) characteristics of materials used in civil and construction engineering, and (3) laboratory methods for the evaluation of materials. The introduction to materials engineering includes information on the basic mechanistic properties of materials, environmental influences, and basic material classes. In addition, one of the responsibilities of civil and construction engineers is the inspection and quality control of materials in the construction process. This requires an understanding of material variability and testing procedures. The atomic structure of materials is covered in order to provide basic understanding of material behavior and to relate the molecular structure to the engineering response.


Download

***********************


***********************

No comments:

Post a Comment

DMCA

Disclaimer for MEP Engineering Café (“MEP Engineering Café”) respects the intellectual property rights of others and expects its users to do the same. In accordance with the Digital Millennium Copyright Act of 1998, the text of which may be found on the U.S. Copyright Office website at http://www.copyright.gov/legislation/dmca.pdf, MEP Engineering Café will respond expeditiously to claims of copyright infringement committed using the MEP Engineering Café service and/or the MEP Engineering Café website.




DMCA.com Protection Status

Social Media

Find your book

Featured Post

 Download Short Circuits in Power Systems A Practical Guide Second Edition By Ismail Kasikci Contents of  Short Circuits in Powe...